The Furuno CSH-10, explained in full.
Furuno's 360-degree omni scanning sonar for sportfishing. Every specification, every feature, the published price of every part, and an upgrade path from the CSH-8L MK2.
Stabilization, on real CSH-10 screens
These are Furuno's own captures of the same water from a CSH-10. Drag across the image. With the stabilizer on, the beam stays on the fish; off, roll and pitch swing the 6° beam and smear the picture.
What changed from the CSH-8L MK2
- Independent transmit and receive stabilization. The CSH-1042 motion sensor is built in, and Furuno credits it with 20% more long-range detection.
- 32 colors instead of 16, for the shading inside a school.
- Up to 900 m detection, which Furuno puts at 20% more long-range detection than the previous model.
- Target lock with speed and course, in fish-school and fixed-position modes.
- NavNet TZtouchXL control and sonar-on-chart overlay.
- Faster hoist: 7 s or 10 s to raise or lower, rated 20 kn down, 18 kn moving.
- Same hull tube as the CSH-8L MK2.
- Frequency
- 83.5 kHz (81.5 to 85.5 selectable)
- Range scales
- 50 to 2,000 m
- Detection
- Up to 900 m (2,900+ ft)
- Transmit beam
- 360° horizontal, 6° vertical
- Colors
- 32 picture, 6 marks
- Resolution
- 1280 x 1024, HDMI x2
- Speed allowance
- 20 kn, 18 kn raise/lower
- Travel
- 400 mm (7 s) or 600 mm (10 s)
- Hoist MSRP
- $9,265
The next generation of Furuno Omni: introducing the CSH10
Furuno's launch film for the CSH10: beam stabilization, target lock and the new display.
On the TZtouchXL
Connect the CSH-10 to a NavNet TZtouchXL running software 25.11 or later and it shows up as a native sensor with its own sonar page. Range, tilt and gain move from the touchscreen, and the sonar picture can be laid over the chart, so a school sits on the contour it's following.
Live from the owners' forum
CSH-10 owners, captains and installers compare settings, installs and results on the OmniCSH forum. Questions get a first answer within a minute from a labeled AI assistant, then the fleet weighs in.
Price a CSH-10 for your boat
We have the contacts and the expertise to recommend the right installer for your boat. We work with a network of licensed, insured, certified and Furuno-approved dealers, and because of the volume we send them, we have pre-negotiated discounted rates. Tell us about the boat and we'll come back with a recommendation and pricing.
- Recommendations from people who work in marine electronics every day, not a call center.
- Pricing through dealers who have pre-negotiated volume rates with us.
- Your details go to one recommended dealer, never to a list.